Quality Inspector

Summary/Objective

The Quality Inspector performs In-process inspections, final inspections, incoming inspections, first article inspections, leak testing, in-process audits, material certification testing, and (CMM) Coordinate Measuring Machines/tooling to perform inspections.  Additionally, this positions responsibility includes training, operating test equipment, assist in the development of test fixtures, maintains equipment, performs preventative maintenance, performs equipment calibrations, and completes quality assurance documentation as required.   

Essential Functions

• Inspects precision fabricated components.
• Perform first article inspection, in-process inspection, incoming inspection and final inspections.
• Communicates and documents inspection results.
• Regularly measure and perform inspection on parts.
• Properly handle, label and document non-conforming parts.
• Communicate with appropriate personnel immediately upon discovery of potential problems and work to solve problems promptly and logically.
• Monitors Leak Check and CMM machines for proper operation.
• Understanding of quality inspection as it relates to form, fit and function.
• Assist in the performance of quality audits of internal processes.
• Communicates with maintenance, service personnel and management on machine services required.
• Use appropriate documentation and paperwork, complete setup, and document as necessary.
• Completes necessary job tracking, traveler, or work order documentation as necessary.
• Verify measurement equipment is within the calibration period prior to use.
• Report any out-of-date calibrated equipment to the appropriate person and properly store in rejected, “Do Not Use” area till dispositioned.
• Assist in receiving and final inspection when required.
• Assist receiving with CMM first article inspection of vendor supplied product.
• Assist in the testing, documentation and certification of vendor supplied product using the XRF.
• Other duties as assigned.

Work Environment

While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Refer to detailed Physical Requirement document.

Supervisory Responsibilities

This position has no supervisory responsibilities.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.  Duties, responsibilities and activities may change at any time with or without notice.

Equal Opportunity Employer Veterans/Disabled

All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, sex, gender identity, age, marital status, genetic information, sexual orientation, national origin, disability (including pregnancy), veteran status, or any other characteristic protected by state, federal, or local law.

PHYSICAL DEMANDS

Never/Rarely<1%

Occasional 1-33%

Frequent 34-66%

Continuous 67-100%

                        Lift/Carry

                                    1 to 10 lbs.

X

                                    11 to 20 lbs.

X

                                    21 to 50 lbs.

X

                                    51 to 75 lbs.

X

                                    76 to 100 lbs.

X

                        Push/Pull

                                    1 to 10 lbs.

X

                                    11 to 20 lbs.

X

                                    21 to 50 lbs.

X

                                    51 to 75 lbs.

X

                                    76 to 100 lbs.

X

Balancing

X

Bend/Stoop/Twist

X

Crouch/Squat

X

Kneel/Crawl

X

Reaching Front

X

Reach Above Shoulders

X

Reach Below Shoulders

X

Sitting

X

Standing

X

Twisting

X

Walking

X

Hearing

X

Speech

X

Vision

X

Repetitive Arm Use

X

Repetitive Wrist Use

X

Repetitive Hand Use

X

Grasping

X

Squeezing

X

Sensation/Touch

X

Head Movement

X

Climb Stairs/Ladder

X

EQUIPMENT USE & OPERATION

Never/Rarely<1%

Occasional 1-33%

Frequent 34-66%

Continuous 67-100%

Motor Vehicle

X

Forklift

X

Lawn Equipment

X

Using Hand or Power Tools

X

Operate Foot Pedals

X

ENVIRONMENTAL CONDITIONS

Never/Rarely<1%

Occasional 1-33%

Frequent 34-66%

Continuous 67-100%

Exposure to electrical hazards

X

Work in cramped spaces

X

Exposure to dust/smoke

X

Exposure to fumes/odors/grease/oil

X

Works in hot/cold temperatures

X

Travel required

X

Works inside

X

Works outside

X

Exposure to noise

X

Exposure to chemicals

X

Stand on concrete

X

Vibration

X

Exposure to toxic materials

X

Works at unprotected heights

X

Walk on uneven or slippery surface

X

Works in wet conditions

X

Works with others

X

Works alone

X

Works with moving machinery

X

MENTAL DEMANDS

Never/Rarely<1%

Occasional 1-33%

Frequent 34-66%

Continuous 67-100%

Problem solving

X

Analytical ability

X

Communication – oral

X

Communication – written

X

Money handling

X

Organization

X

Interpersonal skills

X

Calculating

X

Concentration

X

Perception

X

Creativity

X

Work with interruptions

X

DEXTERITY REQUIREMENTS

Never/Rarely<1%

Occasional 1-33%

Frequent 34-66%

Continuous 67-100%

Eye/hand coordination

X

Fine manipulation (keying, writing, picking, pinching)

X

Handling (holding, grasping)

X

Wrist motion (repetitive flexion/rotation)

X

Qualifications

• Must be authorized to work in the U.S. without sponsorship.

Educations and Experience

• High School diploma, GED and/or Technical School Graduate.
• Training in CMM equipment (such as Faro or Zeist), NIST, AWS, ASQ or relevant industry recognized certifications is recommended.
• Six (6) months of practical experience in a wide area of quality inspection functions, the ability to set-up and operate CMM equipment, knowledge of weldments, weld inspection and other quality assurance functions.

Skills and Competencies

• Must have advanced math skills.
• Analytical skills sufficient to calculate angles, feature locations, tolerances, etc.
• Able to read, write, and have a working knowledge of English.
• A knowledge of technical drawings is required.
• Advanced blueprint reading.
• Working knowledge of GD and T.
• Proficient in Microsoft Office Applications.
• Knowledge in the use of Vernier calipers and micrometers.
• Proficient in the use of optical comparator, surface plates, height gages, drop gages, micrometer, and other precision equipment.
• Capable of learning Faro, Zeiss, and similar CMM measuring equipment; Leak Detector tooling; Hydrostatic Testing, and other testing unique to ANCORP product.