Production Operations

Summary:

• Work Mode: Onsite
• This role is a temp to hire role.

Responsibilities:

• Set up and operate compression presses to produce molded parts in compliance with established safety regulations and SOIs.
• Spray mold with lube as required.
• Operate compression presses.
• Assemble and weigh preps according to molding specification.
• Load prep into mold per molding specification.
• Close mold and begin cure cycle.
• Unload cured parts.
• Visually inspect parts for defects according to inspection standards.
• Trim, inspect, and pack as required in finishing specifications.
• Record required information on reports.

Requirements:

• Ability to read and comprehend SOIs, safety regulations, and inspection standards.
• Ability to run multiple presses with different processes.
• While performing the essential functions of this job, the employee is required to continuously walk, stand, and hear (more than 6 hours/8 hour workday).
• Frequently talk; use hands and fingers to handle; reach with hands and arms (up to 6 hours/8 hour workday).
• Occasionally lift up to 30 lbs. (less than 2 hours/8 hour workday).

Preferred Skills:

• None required.

Work Environment:

• Safety shoes, safety glasses, and hearing protection are required.
• Heat resistant gloves required on certain jobs.
• The ambient temperature in the work environment during the summer months can exceed 100 degrees.
• Exposed to extreme surface temperature on molds.