Shot Peen Operator - Aerospace

Shot Peen Operators safely set up and operate shot peening equipment to process aerospace components in accordance with applicable technique sheets, work instructions, customer specifications, and quality requirements. They load and unload parts, establish and monitor process parameters, perform Almen strip testing, complete required documentation, and support equipment testing and maintenance in accordance with Nadcap, customer, and company requirements.

This role is identified as requiring ITAR (International Traffic in Arms Regulations) compliance; therefore, qualified candidates must meet the definition of a U.S. Person (per EAR Part 772 and ITAR 120.15):

• An individual who is granted U.S. citizenship, or
• An individual who is granted U.S. permanent residence (i.e., a "Green Card" holder), or
• An individual who is granted status as a "protected person"

Essential Functions
To accomplish this job, an individual must be able to perform each essential functionsatisfactorily. Reasonable accommodation may be made to help enable qualifiedindividuals with disabilities to perform the essential functions.

• Sets up and operates shot peening equipment to process aerospace components inaccordance with applicable technique sheets, work instructions, customerspecifications, and quality requirements
• Identifies applicable part families and uses required documentation to determinethe proper machine, nozzle, fixture, and process settings
• Sets and adjusts blast times, nozzle positions, fixture settings, air pressure, andother applicable equipment parameters
• Performs required test runs using Almen strips and accurately measures resultsusing an Almen gauge to verify shot peening intensity and process compliance
• Monitors equipment and process parameters throughout operations to ensureestablished requirements are maintained
• Loads, unloads, positions, and secures parts and fixtures using appropriatehandling and lifting techniques
• Coordinates with Production Control, Processing personnel, and other applicabledepartments to support inventory and production flow
• Accurately completes required process logs, equipment records, test results, andother documentation
• Performs required equipment checks, testing, and routine maintenance activities inaccordance with applicable Nadcap, customer, and company requirements
• Identifies and communicates equipment concerns, process deviations, or otherconditions that may affect product quality or production
• Follows established procedures for handling parts or processes that do not meetapplicable requirements
• Reads and follows safety rules, operating and maintenance instructions, proceduremanuals, work instructions, and other applicable documentation
• Maintains a clean, organized, and safe work area
• Follows all applicable safety procedures, properly uses required personal protectiveequipment, and performs work in a constant state of alertness and in a safe manner
• Completes other duties as required
• Regular attendance on-site at the workplace is required

Work Experience

• One to two years of related manufacturing, processing, or shot peening experienceis preferred
• Aerospace or precision manufacturing experience is preferred

Education

• High school diploma or GED required

Other Required Skills and Abilities

• Ability to learn and follow shot peening processes, procedures, and applicablecustomer requirements
• Ability to read and understand technique sheets, work instructions, operatingprocedures, safety requirements, and other technical documentation
• Ability to properly set up and operate shot peening equipment and maintainrequired machine and process parameters
• Ability to perform Almen strip testing and accurately use an Almen gauge
• Ability to complete required training, testing, and qualification requirementsapplicable to the position and Nadcap processes
• Strong attention to detail and ability to perform work accurately and thoroughly
• Ability to recognize and communicate equipment, processing, or quality concerns
• Ability to organize work and coordinate with applicable personnel to maintainproduction and inventory flow
• Demonstrated reliability, accountability, and ability to follow establishedprocedures
• Demonstrated commitment to workplace safety and ability to identify conditionsthat may affect employee or product safety
• Ability to communicate effectively and professionally, both verbally and in writing
• Ability to complete routine reports, processing records, and other requireddocumentation
• Ability to work effectively both independently and as part of a team
• Ability to establish and maintain positive and effective working relationships withcoworkers and other personnel

Physical Demands and Work Environment
To perform the essential functions of the role, employees must be able to perform thefollowing activities with or without reasonable accommodation:

• Regularly stand and walk throughout the facility and manufacturing areas
• Regularly use hands and fingers to grasp, manipulate, handle, position, load, andunload aerospace components, fixtures, tools, and equipment
• Regularly reach outward while operating equipment and handling parts
• Occasionally reach above shoulder level, bend, stoop, squat, or kneel
• Sit as required while performing processing, documentation, or other job duties
• Regularly lift and carry parts or materials weighing up to 20 pounds
• Frequently lift and carry parts or materials weighing between 21 and 50 pounds
• Occasionally lift or carry parts or materials weighing more than 50 pounds usingappropriate material-handling equipment and/or peer assistance
• Push or pull parts, carts, fixtures, or equipment as required, using appropriatematerial-handling equipment and/or peer assistance for heavier loads
• Possess the near, distance, peripheral, and depth perception necessary to safelyoperate equipment, inspect components, read gauges, and perform required testing
• Hear and recognize equipment sounds that may indicate machine or processingconcerns
• Work around odors associated with manufacturing and processing operations
• Wear required personal protective equipment

Working Conditions
Work is primarily performed in a manufacturing shop and processing environment where working conditions may vary. The employee may be exposed to:

• Shot peening and other manufacturing or processing equipment and associatedshop hazards
• Noise from machinery, compressed air, and manufacturing operations
• Dust, particulate matter, mist, fumes, vapors, or chemicals associated withmanufacturing and processing operations
• Heat, cold, and varying temperatures within manufacturing and processing areas
• Moving equipment, parts, fixtures, and other materials
• Hazardous equipment, including forklifts, hand tools, cranes or other lifting devices,and other equipment used in a manufacturing environment

The use of required PPE, including eye protection, hand protection, hearing protection,safety footwear, and other protective equipment appropriate to the processing activity, isrequired.