BEASLEY TIMBER LOGGING - GA -SKIDDER OPERATOR (47190)

Duties and Responsibilities:
-     Must be able to skid harvested timber to the loader.
-     Must have good work ethics and willing to work with and assist co-workers.
-     Must be aware of SMZ (stream management zones) areas.
-     Must read and understand “Georgia’s Best Management Practices for Forestry” Manual.

Primary Duties:
-     Must check engine oil, coolant, and hydraulic levels at the beginning of each shift.
-     Must inspect equipment for leaks or damaged hydraulic lines before operating. Report leaks and/or damages to the crew leader.
-     Must service machine, such as lubricating, as the crew leader recommends.
-     Must keep de-limber cleared of debris.
-     Must know if landowner wants debris put in pile(s) or scattered in logging site.
-     Must be able to transport loader to the loading deck.
-     Must transport loader with landing gear not too far off ground (less than 2 feet) as this causes a potential rollover of the equipment.
-     Must not overload machine to prevent front tires leaving the ground and the operator’s losing control of the machine.  Also, overloading may cause machine damage.

Secondary Duties:
-     Must wear appropriate PPE when necessary.
-     Must complete all applicable maintenance videos.
-     Must complete all applicable safety videos.
-     Must be able to operate winch to tow other machinery or trucks stuck in bogs.
-     Must be trained in lockout/tagout procedures when machine is being inspected or repaired.
-     Must wear leather gloves when handling cable on winch.
-     Must wear a hard hat and orange vest when on the ground.
 

Qualifications

Skills Needed to Perform Job:
-   Previous experience is preferred; however, on-the-job training from an experienced loader operator is an option.