VENDORS QC INSPECTOR (Turkish Nationals Only)

Our client is a global multi-energy company operating large-scale refining and petrochemical facilities. It transforms crude oil into fuels and essential industrial products through highly integrated and technologically advanced operations. The organisation is recognized for its strong HSE culture, operational excellence, and commitment to reducing environmental impact. Joining the company means contributing to complex international projects within a high-performance industrial environment.

MISSIONS & ACTIVITIES

DIMENSIONS

AGUP PHASE 2 – CPF-2 VENDORS QC INSPECTOR M/F

The main missions and activities of the Job Holder are as follows:

Inspection & Surveillance

• Performvendor shop inspections during fabrication, assembly, testing, and packaging activities,
• Ensure execution of inspections in accordance withapproved ITPs, QCPs, and procedures,
• Verifyhold, witness, surveillance points and ensure timely notification to all parties,
• Monitor critical activities including:
  • Material identification and traceability,
  • Welding, NDT, PWHT,
  • Dimensional checks,
  • Hydrostatic / pneumatic tests,
  • Functional and performance tests,

Document Review & Records

• Review and verify vendor documentation such as:
  • Material Test Certificates (MTC / MTR),
  • Welding documents (WPS, WPQR, weld maps),
  • NDT reports and qualifications,
  • Calibration certificates,
  • Test and inspection reports,
• EnsureManufacturing Record Book (MRB / Dossier) completeness and accuracy,
• Endorseinspection reports and issuerelease / shipping clearance when applicable,

Compliance & Standards

• Ensure compliance with applicable standards and codes, such as:
  • ISO, ASME, API, ASTM, EN for instance,
  • Project specifications and MR requirements,
• Identify deviations and issueNon-Conformance Reports (NCRs),
• Follow upcorrective actions and verify closure,

Factory Acceptance & Testing

• Participate in:
  • FAT (Factory Acceptance Tests),
  • Final inspections and pre-shipment inspections,
• Verifypreservation, packing, and marking before dispatch,

Reporting & Coordination

• Preparedaily / inspection visit reports
• Coordinate withvendor QC, engineering, and client/Third-party Inspectors (TPI),
• Provideclear and timely feedback to project QA/QC team.

CONTEXT & ENVIRONMENT

Agreements were signed byTotalEnergies in Iraq to enhance the development of the country’s natural resources. TheGGIP project, located in the Basra region, a 5-in-1 project:

• The Associated Gas Upstream Project Phase 1: Enhance Ratawi Oil field production thanks to infrastructures upgrade and new export pipeline (AGUP1), in addition to a gas export and process facilities (AG25).

• The Associated Gas Upstream Project Phase 2: Enhance Ratawi Oil field production to210 kbpd with a new CPF and additional development wells (AGUP2).

• The Gas Midstream Project - GMP: Valorize the gas fromRatawi, Majoon and Al Qurna West-2 (Phase I) oil fields.

• The Common Seawater Supply Project - CSSP: Major water-injection project that will help the long-term production of several fields of South Iraq. TotalEnergies will only be involved into theseawater treatment plant building.

• The Solar Power Plant - SPP: major solar project (PV plant with 1250 GW DC) which will allow to produce power (1000 GW AC) to be injected into the grid.

AGUP Phase 2 is the major full field development. It involvesdrilling around 221 wells, feeding a new built CPF, at TotalEnergies standards, with a capacity of 210 kbopd. Oil will flow respectively at60 to 80 kbopd from Yamama (~100 MMscfd) and150 to 130 kbopd from LP reservoirs (~30 MMscfd).

AGUP2 project will be developed with the objective to maximize economical results, with a particular focus on the CAPEX, while maintaining thetechnical quality of the installations, with high H3SE requirements and focus. The project development includes severalinterfaces with other projects (mainly AGUP ph1, GMP and CSSP) which shall be managed in an optimized and agile manner.

The country context is complex due to several factors and risks to be mitigated all along the project. Particular attention will be paid to thesafety culture enhancement and to thelocal content that will be a key factor for the Project’s success.

ACCOUNTABILITIES

CANDIDATE PROFILE / QUALIFICATIONS

Accountable for ensuring that allvendor manufacturing, inspection, and testing activities are performed in full compliance with:

• Contract requirements,

• Approved project specifications and drawings,

• Applicable TotalEnergies GS specifications,

• International codes and standards referenced in the contract,

• Follow-up and assessment of theQuality during CPF-2 Procurement and EPSCC Subcontracting activities,

• Raise awareness of the management forany deviation in regards with Quality or to EPSCC contract requirements,

• Accountable for issuingclear, factual, and timely inspection reports,

Accountable for verifying thatapproved ITPs and Quality Control Plans (QCPs) are strictly applied by the Vendor, including:

• Respect ofHold, Witness, Review, and Surveillance points

• Proper notification toCOMPANY / CONTRACTOR as required by contract

• No progression beyond Hold Points without written clearance

Material Compliance & Traceability

• Accountable for confirmingmaterial conformity and traceability in accordance with contract and GS requirements, including:

  • Verification ofMaterial Test Certificates (MTC / EN 10204)

  • Traceability from raw material to finished equipment

  • Properidentification, segregation, storage, and preservation

• Accountable for preventing use ofnon-conforming, unidentified, or untraceable materials.

Professional experience:

• Degree: Diploma/ Degree in technical discipline,

• Minimum 10 years of experience in Oil & Gas Industry or Heavy industries with similar large-scale projects and context inContract, Engineering and Construction activities for Onshore (or Onshore yards) projects,

Technical competencies:

• Experience inQuality Supervision, Inspection coordination, Procurement, Non destructive Examination and Welding,

• Welding Professional Qualification – Minimum CSWIP 3.2.1 certification

• NDT Qualification – Minimum CSWIP or PCN Level II in RT and ASNT Level II in UT/MT/PT

• Painting/Coating Qualification – Minimum BGAS/CSWIP Grade 2 or AMPP (NACE CIP) Grade 2

• QA Lead Auditor Qualification (desirable)

• Experience inEngineering discipline might be a plus,

Behavioral competencies:

• Ability to adapt and torepresent the Company in discussions and meetings with Vendors, main Contractor and Subcontractors,

• Good communication skills,

• Flexibility and mobility,

• Proven records of ability to effectively integrate a team and adhere to team-spirit rules. Demonstrate sound organization ability and work in amulti-cultural/international business environment,

• Strong Leadership Good interpersonal and communication skills; Good motivational skills,

• Dedication and ability to work under pressing conditions.

Fluent in English (absolute mandatory)

Place of work  : Istanbul, Turkey